Deviation of slitting machine blade

Release time：2019-12-28　　　　 Time to browse

　　Slitting machine blade is an important processing link in the production of cardboard boxes, so if the slitting machine blade deviation will affect the quality of cardboard, carton products, and even produced products are waste. Therefore, we need to analyze the common deviation of corrugated board slitting machine blades to reduce the waste in the production of cardboard boxes.

　　Tail deviation of slitting board by cutting blade of slitting machine:

　　1. Improper adjustment of feeding position baffle of cutting machine blade;

　　2. The cutting blade has a dull section, which is different from the linear speed of other knives;

　　3. Improper adjustment of guide wheel of cutting machine blade;

　　4, cutting machine blade feeding improper.

　　The cutting machine blade produces rough edges:

　　1. The cutting machine blade is blunt and should be polished;

　　2. The blade of slitting machine overlaps too shallow with the groove;

　　3, the cutting machine blade groove involved in the paper edge, paper wool, should be cleaned before starting;

　　4, slitting machine blade slot clearance is too large, generally not more than 2.5mm is appropriate.

　　Indentation line of slitting machine blade is easy to break:

　　1. Inferior base paper;

　　2. Pressure line is too deep.

　　Indentation line of slitting machine blade is not straight:

　　1, cutting machine blade pressure line is too shallow, broken line uneven, affecting the box beautiful;

　　2, cutting machine blade feed paper deflection;

　　3, cutting machine blade upper and lower pressure line wheel is not adjusted.

　　Cutting edge of slitting machine blade is not vertical:

　　1. The Angle of the cutter blade holder is not right;

　　2. The cutting machine blade is not in the center of the groove;

　　3, slitting machine blade deflection.